Full Metadata -
View Attributes -
-  none available  -
Get Data -


Ramsey County Orthophotography 2003

This page last updated: 10/10/2005
Metadata created using Minnesota Geographic Metadata Guidelines


Metadata Summary

Originator Ramsey County
Abstract Horizons, Inc obtained color photography covering Ramsey County on April 8, 2003. Horizons, Inc used LIDAR DEM provided by Waggoner Inc. to create digital ortho images. Horizons, Inc also collected planimetric features using a combination of analytical and soft-copy technology.
Browse Graphic none available
Time Period of Content Date 04/08/2003
Currentness Reference Ground Condition
Access Constraints This data set is available to everyone. Fees and policy are published in the Ramsey County Fee Schedule. Charges are variable and are subject to change. See the Ramsey County Fee Schedule for specific information on fees and policy.
Use Constraints COPYRIGHT NOTICE
The data is Copyright © by the County of Ramsey. All rights reserved. Except as expressly provided herein, no part of this data may be copied, reproduced, sold, transferred, or transmitted in any form, or by any means, whether graphic, electronic, or mechanical, including photocopying, recording, or by an information storage or retrieval system, without express prior written permission of the County of Ramsey.
Distributor Organization Ramsey County Surveyor's Office
Ordering Instructions Contact Distributer
Online Linkage none available


Full Metadata
Ramsey County Orthophotography 2003

Go to Section:
1. Identification Information
2. Data Quality Information
3. Spatial Data Organization Information
4. Spatial Reference Information
5. Entity and Attribute Information
6. Distribution Information
7. Metadata Reference Information

 
Section 1 Identification Information   Top of page
Originator Ramsey County
Title Ramsey County Orthophotography 2003
Abstract Horizons, Inc obtained color photography covering Ramsey County on April 8, 2003. Horizons, Inc used LIDAR DEM provided by Waggoner Inc. to create digital ortho images. Horizons, Inc also collected planimetric features using a combination of analytical and soft-copy technology.
Purpose The purpose of this project was to provide Ramsey County with Color digital ortho images, and topological correct planimetric features in Arc/INFO Format.
Time Period of Content Date 04/08/2003
Currentness Reference Ground Condition
Progress Complete
Maintenance and Update Frequency scheduled to update every 3 years
Spatial Extent of Data Horizons Incorporated acquired aerial photography utilizing a gyro
stabilized wide-angle aerial camera equipped with forward motion compensation
(HZ11, ZEISS RMK TOP15, SN: 144123, CFL:152.772). The project was flown at an
altitude of 5000 feet above
Bounding Coordinates -93.234052
-92.981601
45.125198
44.877762
Place Keywords Ramsey County, Minnesota
Theme Keywords Aerial Photography
Theme Keyword Thesaurus None
Access Constraints This data set is available to everyone. Fees and policy are published in the Ramsey County Fee Schedule. Charges are variable and are subject to change. See the Ramsey County Fee Schedule for specific information on fees and policy.
Use Constraints COPYRIGHT NOTICE
The data is Copyright © by the County of Ramsey. All rights reserved. Except as expressly provided herein, no part of this data may be copied, reproduced, sold, transferred, or transmitted in any form, or by any means, whether graphic, electronic, or mechanical, including photocopying, recording, or by an information storage or retrieval system, without express prior written permission of the County of Ramsey.
Contact Person Information Curt Peterson, GIS Supervisor
Ramsey County Surveyor's Office
1425 Paul Kirkwold Drive
Arden Hills, MN 55112-3933
Phone: 651.266.7172
FAX: 651.266.7180
E-mail: curtis.peterson@co.ramsey.mn.us
Browse Graphic none available
Browse Graphic File Description
Associated Data Sets Graphic:
Contours (2' contour lines)
Annotation (parcel, road and water map text)
Info (landties, cartographic elements)
StrCenterlines (road centerlines)
Point (land ownership points)
Line (land division outlines)
ParComp (land division areas)
Parcel (land ownership regions)
PLS (Public Land Survey)

Data Sets:
COREDB.DBF (CORE PARCEL ATTRIBUTE DATABASE)
EPARDES.DBF (ACS PARCEL DESCRIPTION DB)
ECURTAX.DBF (ACS CURRENT TAX DB)
ENAMADD.DBF (ACS NAME AND ADDRESS DB)
ENAMADDO.DBF (ACS NAME AND ADDRESS OTHER DB)
EVALUES.DBF (ACS TAX VALUES DB)
EDELTAX.DBF (ACS DELINQUENT TAX DB)
ESPASMT.DBF (ACS SPECIAL ASSESSMENTS DB)
ETRDETL.DBF (ACS TRANSACTION DETAIL DB)
APT.DBF (ASSESSOR'S APARTMENT DESCRIPTION DB)
COMMAREA.DBF (ASSESSOR'S COMMERCIAL AREA DESCRIPTION DB)
COMMDATA.DBF (ASSESSOR'S COMMERCIAL BUILDING DESCRIPTION DB)
DWELLDATA.DBF (ASSESSOR'S RESIDENTIAL DWELLING DESCRIPTION DB)
LANDDATA.DBF (ASSESSOR'S LAND DESCRIPTION DB)
PARCELDA.DBF (ASSESSOR'S PARCEL DESCRIPTION DB)
PERMIT.DBF (PERMIT DB)
SALES.DBF (SALES DATABASE)

 
Section 2 Data Quality Information Top of full metadata Top of page
Attribute Accuracy None
Logical Consistency None
Completeness None
Horizontal Positional Accuracy Analytical Aerial Triangulation Summary Date: 05-30-03. This data
meets or exceeds the National Map Accuracy Standard (NMAS) - 1/30 of 1 inch at
map scale.
Vertical Positional Accuracy Not Applicable as it pertains to a two-dimensional Raster image.
Lineage Scanner: Intergraph PhotoScan TD Photo Digitizing System.
Scanner Geometric Calibration:
Standard Deviation (sigma) = 1.6710356970
Root Mean Square X = 1.9970393211
Root Mean Square Y = 0.9624905604
Scanner setting:
Transmissivity: 0.0151 0.6610
Film Density: 1.8210 0.1778
Gamma: 1.75
Quality Control Procedures:
Film was kept in airtight containers prior to scanning. Both the base
and emulsion sides of the film were cleaned using a tacky roller system prior to
scanning. Color adjustment was achieved by visually matching the tone, contrast,
and brightness to the original film. Each scanned image was checked
computationally for missing data.
Quality Control Procedures for orthophoto production:
After individual orthophotos were mosaiced into a regional database,
the resulting orthophoto composite was visually inspected for tone balance and
image distortion. In areas of image distortion, more suitable orthophoto
imagery was inserted, when possible. The final orthophotos were visually
inspected for accuracy and consistency.
Source Scale Denominator 2400
 
Section 3 Spatial Data Organization Information Top of full metadata Top of page
Native Data Set Environment Microsoft Windows 2000 Version 5.0 (Build 2195) Service Pack 4; ESRI ArcCatalog 9.1.0.722
Geographic Reference for Tabular Data
Spatial Object Type Raster
Vendor Specific Object Types
Tiling Scheme
 
Section 4 Spatial Reference Information Top of full metadata Top of page
Horizontal Coordinate Scheme County Coordinates
Ellipsoid GRS80
Horizontal Datum NAD83
Horizontal Units Feet
Distance Resolution
Cell Width 0.500000
Cell Height 0.500000
County Coordinate Zone Identifier 43
 
Section 5 Entity and Attribute Information Top of full metadata Top of page
Entity and Attribute Overview ZEISS RMK TOP 15 Calibrated focal length: 152.773 mm.
Orthophoto Pixel Size = 0.5?
Entity and Attribute Detailed Citation None
 
Section 6 Distribution Information Top of full metadata Top of page
Publisher Ramsey County Surveyor's Office
Publication Date 10/10/2005
Contact Person Information David Wilford
GIS Technician
Ramsey County Surveyor's Office
1425 Paul Kirkwold Drive
Arden Hills, MN 55112-3933
Phone: 651.266.7175
FAX: 651.266.7180
E-mail: david.wilford@co.ramsey.mn.us
Distributor's Data Set Identifier Ramsey County Surveyor's Office Orthophotos
Distribution Liability DISCLAIMER
EXCEPT AS EXPRESSLY STATED HEREIN, THIS DATA IS PROVIDED AS IS WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. LICENSEE BEARS ANY AND ALL RISK RELATING TO QUALITY AND PERFORMANCE OF THIS DATA.

Limit on Liability
This data is not a legally recorded map or survey and is not intended to be used as one. This data is a compilation of records and information from various state, county, and city offices, and other sources, and should be used for reference only.

In no event will the County of Ramsey be liable for direct, indirect, special, incidental, or consequential damages arising out of the use of, or inability to use, the data, even if advised of the possibility of such damages. Specifically, the County of Ramsey is not responsible for any costs including, but not limited to, those incurred as a result of lost profits or revenue, loss of use of data, the costs of recovering such programs or data, the cost of any substitute programs or data, claims by third parties, or for other similar costs.

The sole liability of the County of Ramsey and the licensee's exclusive remedy for any substantial defect which impairs the licensee's use of the data for purposes stated herein shall be the right to terminate this license and refund any fee paid.
Transfer Format Name
Transfer Format Version Number
Transfer Size
Ordering Instructions Contact Distributer
Online Linkage none available
 
Section 7 Metadata Reference Information Top of full metadata Top of page
Metadata Date 10/10/2005
Contact Person Information Chris Ulrich, GIS Technician
Ramsey County Surveyor's Office
1425 Paul Kirkwold Drive
Arden Hills, MN 55112-3933
Phone: 651.266.7176
FAX: 651.266.7180
E-mail: Christina.Ulrich@co.ramsey.mn.us
Metadata Standard Name Minnesota Geographic Metadata Guidelines
Metadata Standard Version 1.2
Metadata Standard Online Linkage http://www.gis.state.mn.us/stds/metadata.htm



This page last updated: 10/10/2005